High Breaking Capacity Fast Acting Ceramic Fuse

5x20mm High Breaking Capacity Fast Acting Quick Blow Ceramic Fuse T3.15A 250VAC

Features Of High Breaking Capacity Fast Acting Ceramic Fuse

- Time-delay, high breaking capacity

- Ceramic tube, Silver plated copper cap construction

- Available in cartridge and pigtail axial lead

- Halogen Free

- Lead Free

- Designed to UL/CSA/ANCE 248 Standard

- Available in cartridge and axial lead format

- RoHS compliant and lead-free

Applications Of High Breaking Capacity Fast Acting Ceramic Fuse

- Primary Protection in Equipment

- Power Supply Adapter for e.g. laptops

- SMPS (Switching Mode Power Supply) for TV's and DVD's

- DC/DC modules

- Industrial Power Supplies

Soldering parameters for High Breaking Capacity Fast Acting Ceramic Fuse

Wave Soldering Compatible: (260℃,10 sec max)

Hand-Solder:

Solder Iron Temperature: (350℃+/-5℃)

Heating Time: (5 sec max)

Size Of High Breaking Capacity Fast Acting Ceramic Fuse (mm)

Part Number Of High Breaking Capacity Fast Acting Ceramic Fuse

Operating Characteristics Of High Breaking Capacity Fast Acting Ceramic Fuse

Packing Quantity Of High Breaking Capacity Fast Acting Ceramic Fuse

Bulk 250 pcs in per poly bag;

10 poly bags in per inner box;

4 inner boxes in per outer carton

Recommended Soldering Parameters Of High Breaking Capacity Fast Acting Ceramic Fuse

Wave Parameters

Solder Pot Temperature: 260℃ Max

Solder Dwell Time:2~5s

Hand-Solder Parameters:

Solder Iron Temperature: 350±5℃

Heating Time: 5s Max

Environmental Characteristic Of High Breaking Capacity Fast Acting Ceramic Fuse

Operating Temperature:-55～+125℃
Stock Condition
Humidity：Relative humidity ≤ 75% store 3 years in average.

When choosing the fuse's specification, if the operating environmental temperature beyond the scope from 20~30℃, engineer should consider the environmental temperature's affection to fuses. Please refer: Temperature Rerating Curve:

How to Test a Of High Breaking Capacity Fast Acting Ceramic Fuse

Ceramic fuses act as a safety device that interrupts the electrical power supply when electrical overloads or surges occur. Internal, thin, wire filaments melt and stop the electrical current to prevent harm to an appliance or other electrical device. A homeowner can determine if a glass fuse in blown by performing a visual inspection and looking for a break in the thin wire and a brown discoloration in the center of the fuse. A ceramic fuse, however, shows no damage upon visual inspection. Testing a ceramic fuse is the only way to tell if the fuse has blown.

Step 1

Turn off the power supply to the appliance or other electrical device if the device is hard-wired. If the appliance has a plug, unplug the power cord.

Step 2

Set an ohmmeter or multimeter dial to zero. Multimeters read both volts and ohms. If you are using a multimeter, set the multimeter to the ohm setting.

Step 3

Touch one end of the fuse terminal with the black test probe and the other end of the fuse terminal with the red test probe.

Step 4

Read the ohmmeter display. If the display shows the needle at zero or the digital display shows zero, the fuse is in good working condition. Any other reading above zero indicates the fuse is no longer working and has blown.